Diameter 32 Mm Open Loop Hall Effect Sensor CS1000S CE Rohs ISO9001 Approved
Detailed Product Description
| Color: |
Black |
Hole: |
32mm |
| Power Supply: |
+/-12V~+/-15V |
Output: |
4V |
| Accuracy: |
1% |
Capacity: |
100000pcs/month |
Diameter 32 mm 4V Output Hall Effect Current Sensor CS1000S ± 15V
Features:
Hall current sensors are mainly used to isolate and convert AC, DC, pulse and other complex signals .After signals are convertedaccording to the Hall Effect Theory,the can be directly acquired by AD, DSP, PLC, secondary instruments and other devices.
They feature the quick response ,wide range of measurement,high precision ,strong overload capcity,good linearity and excellent and anti-interference performace.
| Electrical characteristics |
| |
Type |
CS100S |
CS200S |
CS300S |
CS400S |
CS500S |
CS600S |
CS1000S |
|
| IPN |
Primary nominal input current |
100 |
200 |
300 |
400 |
500 |
600 |
1000 |
A |
| IP |
Measuring range of primary current |
0~±300 |
0~±600 |
0~±900 |
0~±1200 |
0~±1200 |
0~±1200 |
0~±1200 |
A |
| VOUT |
Nominal output voltage |
4±1% |
V |
| VC |
Supply voltage |
±15(±5%) |
V |
| IC |
Current consumption |
VC=±15V <25 |
mA |
| VD |
Insulation voltage |
AC/50Hz/1min 3 |
kV |
| εL |
Linearity |
<1 |
%FS |
| VO |
Offset voltage |
TA=25℃ <±25 |
mV |
| VOM |
Residual voltage |
IPN→0 <±25 |
mV |
| VOT |
Thermal drift of V0 |
IP=0 TA=–25~+85℃ <±1 |
mV/℃ |
| TR |
Response time |
≤5 |
μs |
| f |
Frequency bandwidth(-3dB) |
DC~20 |
kHz |
| TA |
Ambient operating temperature |
–25~+85 |
℃ |
| TS |
Ambient storage temperature |
–40~+100 |
℃ |
| RL |
Load resistance |
≥10 |
KΩ |
| |
Standard |
Q/3201CHGL02-2016 |
|
